Triac regulator RTE 6
7.9.2017
ADS-RH-D duct sensor
7.9.2017
ADS-CO2-D duct sensor
- works on the optical NDIR principle
- during operation maintenance not required
- 0 – 10 V analog output
- output relay
- easy air duct mounting
- long service life and stability
Enquiry about ADS-CO2-D duct sensor
Enter the security code shown above
It is equipped with voltage/current analog output and with an output relay. The analog output value is proportional to the concentration of CO2. The measuring of CO2 works on the principle of infrared radiation attenuation dependence on the CO2 concentration in the air. Built-in electronics converts the infrared radiation attenuation changes in the measuring cell to the analog output. The sensor is capable to measure the CO2 in the air concentration in the range of 370 up to 2000 ppm.
Attached documents
| Design | Duct |
|---|---|
| Senzor | CO2 – 2000ppm |
| Power supply | 14-40VDC, 18-30VAC |
| Output | Analogue, Relay |
| Privátní Dům / Byt | Bedroom, Living room |
| Komerční prostory | Changing rooms, Halls, Offices, Schools, cinemas |
Related Products
-
NLII-CO2-R sensor with relay
NLII-CO2 with relay is used to monitor air quality inside buildings and power control ventilation (HVAC) systems according to current levels of air internal air quality. It can be effectively used in offices, classrooms, shopping centers, homes, restaurants, fitness centers, commercial buildings, etc.
-
ADS-RH-D duct sensor
- relative humidity measuring
- analog voltage / current output
- output relay
- fully calibrated
- long-term stability
-
NLII-CO2-R-5 sensor
NLII-CO2-R-5 measures to 5 000 ppm. It is used to monitor air quality inside buildings and power control ventilation (HVAC) systems according to current levels of air internal air quality. It can be effectively used in offices, classrooms, shopping centers, homes, restaurants, fitness centers, commercial buildings, etc.
